All Categories

Solar Controller
Home > Energy > Solar Energy Products > Solar Controller

MPPT solar charge controller for power system

A MPPT( Maximum Power Point Tracking ), or maximum power point tracker is an electronic DC to DC converter that optimizes the match between the solar array (PV panels), and the battery bank or utility grid.

FOB Price:
US $ 205.00 - 215.00 / Pieces
MOQ:
5 Pieces
Monthly Capacity:
1000 Pieces
Port:
Guangzhou
Payment Terms:
L/C, T/T, Money Gram, Western Union

Description

Item specifics

Delivery

Delivery Detail:
25 days

Product Description

             
Product Introduction

Brief introduction

A MPPT( Maximum Power Point Tracking ), or maximum power point tracker is an electronic DC to DC converter that optimizes the match between the solar array (PV panels), and the battery bank or utility grid. To put it simply, they convert a higher voltage DC output from solar panels (and a few wind generators) down to the lower voltage needed to charge batteries.

Compared to conventional PWM controller, MPPT technology increases the charge efficiency up to 20% and potentially decrease the power of solar array needed.


Details Show

Features

·Advanced maximum power point tracking technology to optimize using the solar system.

·Excellent thermal design and nature air cooling.

·Peak conversion efficiency of 98%, several seconds tracking speed.

·Adopting temperature compensation , improving the battery lifetime.

·Electronic Protection: over charging, over discharging, overload, short circuit.

·PV Modules or Battery Polarity Reverse Connect Protection: any combination of solar module and battery, without causing damage to any component.

Product Parameters
Model
FL-CSM-4524
FL-CSM-6048
Rated Current
45A
60A
Default Battery System Voltage
12V/24V/36V/48V DC(Auto Detection)
PV Open Circuit Voltage
Operational max=145VDC temperature corrected VOC
PV Array MPPT Voltage Range
16V-120V/32V-150V/48V-150V/64V-150V
Max PV Input Power(12V)
600W
800W
Max PV Input Power(24V)
1200W
1600W
Max PV Input Power(36V)
1800W
2400W
Max PV Input Power(48V)
2400W
3200W
Storage Battery Voltage
Nominal Voltage
12VDC/24VDC/36VDC/48VDC
Absorption Voltage
13.5VDC/27.0VDC/40.5VDC/54.0VDC
Refloat Voltage
13.7VDC/27.4VDC/41.1VDC/54.8VDC
Float Voltage
14.3VDC/28.6VDC/42.9VDC/57.2VDC
low Voltage Protection Point
10.0VDC/20.0VDC/30VDC/40VDC
Display
LED indication
Systematic operation,LV indication,LV protection, over charge protection, loads protection, short circuit protection
LCD display
Charge voltage, charge circuit, voltage of storage battery,capacity of storage battery, output current.
Peak Conversion efficiency
98%
W*H*D(mm)
167.6*257.1*82.9mm
G.W(KG)
3KG

Our Advantages

Our R&D department always concentrate on making the best products for our clients. It makes Felicitysolar always lead the solar business in the market.

Direction Manual

Connection Diagram

Installation Procedure:

Step 1, Choose Mounting Location

Install the Charge Controller in an upright position out of direct sunlight, high temperature, and water.
Step 2, Check for Clearance
Place the mppt controller in the location where it will be mounted. Verify that there is sufficient room to run wires and that there is sufficient room above and below the controller for air flow.

Step 3, Mark Holes
Use a pencil or pen to mark the four mounting hole locations on the wall (mounting surface)
Step 4, Drill Holes
Remove the Charge Controller and drill four size able holes in the marked location.
Step 5, Secure Controller
Insert all W 5/ 16-18 sheet metal screw through each hole and tighten against the wall.

Application Cases

Certification

Product quality and reasonable price are always the base of our development. We have IEC Certificate and a completed quality control system. Our team continuously improve the service, delivery, and other works to build a win-win cooperation with our customers.

Packing&Delivery

Size: 317*140*240mm 0.01CBM 3.2KG

FAQ

Q: How many charging mode does the controller have?

A: There are two charging modes. There are PWM and MPPT. MPPT is the most advanced. Felicity have already developed MTTP charge controller with high performance, reliability, efficiency and fast tracking speed.

Q: What's the difference of the PWM charge controller and MPPT charge controller?

A: 1. MPPT controller uses maximum power tracking technology, compared to the PWM controller, the MPPT can generate more electricity with the same solar panels.

2. MPPT controller has low requirement of solar power system voltage, if the line or component parts damage the voltage, using MPPT controller does not affect the system generating.

3. MPPT controller can detect the temperature of the battery, then adjust the temperature by itself, the solar panel can charge the battery more efficiency.


Q: Why should the controller have temperature compensation function?
A: As temperature rises, electrochemical activity in the battery increases. Similarly, as temperature falls, electrochemical activity decreases. Therefore, as temperature rises, charging voltage should be reduced to prevent overcharge, as temperature falls, charging voltage should be increase to avoid undercharge. In general, to assure optimum service life, use of a temperature compensated charger is recommended.


Q: How does your factory carry out quality control?
A: Quality is our priority. Our QC always attached great importance to quality control from the very beginning to the end of the production. Each product will be fully assembled and carefully tested before packed.


Q: What is the warranty for MPPT Charge Controller FL-CSM6048?

A: For the charge controller, we offer 2 year warranty.
Q: What is MOQ for inverter?
A: MOQ is 1 PC or mixed.
Q: What is the terms of payment?
Q: T/T, L/C, Western Union, PayPal or cash; 30% for deposit, the balance 70% before shipment.
Q:What is the delivery time?
A: 3 work day with stock after receiving the payment. No stock, 25 work days after receiving the payment.


Top
2012- CantonFair E-commerce Co,.Ltd All Rights Reserved . 粤ICP备 12071919 号